LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System >> Repair Instructions >> Brake Rotor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Rotor-To-Front Wheel Hub Detent Screw
    GM1245700Courtesy of GENERAL MOTORS CORP.
  1. Inspect the rotor. Refer to Brake Rotor Surface and Wear Inspection .
    2. NOTE: Refer to Fastener Notice .
  2. Install the rotor to the front wheel hub by tightening the detent screw.

    Tighten:  Tighten the rotor-to-front wheel hub detent screw to 4 N.m (35 lb in).

  3. Install the caliper bracket.

    Tighten:  Tighten the caliper bracket mounting bolts to 95 N.m (70 lb ft).

  4. Install the caliper assembly. Refer to Brake Caliper Replacement .
scientia non olet · About LEMON Manuals