Installation Procedure
- Install the glass in the door.
- Install the guide rail and the bolts.
Tighten: Tighten the guide rail bolts to 7 N.m (62 lb in).
- Install the glass to the window regulator with the screws.
Tighten: Tighten the door glass screws to 7 N.m (62 lb in).
- Install the outside channel molding. Refer to Front Side Door Window Channel Replacement .
- Install the door seal trim. Refer to Door Water Deflector Replacement .
- Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
.