LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Replacement - Bucket >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View of Front Seat and Electrical Connector
    GM1248229Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the driver seat.
  2. NOTE: Refer to Fastener Notice .
  3. Install the bolts into the front and rear portion of the front seat.

    Tighten:  Tighten the front and rear bucket seat bolts to 25 N.m (18 lb ft).