LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock Systems & Door Handles >> Repair Instructions >> Handle Replacement - Rear Compartment Lid Interior Release >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View of Cable From Lock Striker
    GM1252083Courtesy of GENERAL MOTORS CORP.
  1. Open the luggage compartment.
  2. Remove the luggage compartment rear trim panels. Refer to Rear Compartment Trim Panel Replacement .
  3. Remove the lock striker. Refer to Rear Compartment Lid Latch Striker Replacement .
  4. Disconnect the cable from the lock striker.
  5. Fig 2: View of Bolt and Handle
    GM1252078Courtesy of GENERAL MOTORS CORP.
  6. Remove the driver front and the rear seats. Refer to Front Seat Replacement - Bucket and Seat Back Replacement - Rear .
  7. Reposition the floor carpet on the left side of the vehicle.
  8. Remove the bolt and the handle.
  9. Fig 3: View of Cable From Handle
    GM1252079Courtesy of GENERAL MOTORS CORP.
  10. Disconnect the cable from the handle.
  11. Remove the cable.