LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wipers/Washer Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Wiper Switch
    GM1715994Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (2) to the wiper switch.
  2. Install the wiper switch into the switch housing with the tabs (1, 3) on either side of the switch housing.
    3. Fig 2: Steering Column Panels
    GM1715979Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the lower steering column cover panel (5). Install the lower steering column cover panel screws (6, 7, 8).

    Tighten:  Tighten the lower steering column cover panel screws to 3 N.m (27 lb ft).

  4. Install the upper steering cover (1) panel. Install the upper steering column cover panel screws (3, 4).

    Tighten:  Tighten the upper steering column cover panel screws to 3 N.m (27 lb ft).

  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals