LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Hose Replacement - Windshield Washer >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Windshield Washer Hose
    GM1723055Courtesy of GENERAL MOTORS CORP.
  1. Route the washer hose to the washer reservoir.
  2. Connect the washer hose to the washer reservoir.
    3. Fig 2: Front Wheel Well Splash Shield
    GM1719817Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the front wheel well splash shield with the bolts.

    Tighten:  Tighten the front wheel well splash shield bolts to 1.5 N.m (13 lb in).

  4. Install the front left wheel. Refer to Tire and Wheel Removal and Installation .
  5. Connect the windshield washer hose to the washer nozzles on the hood.
  6. Close the hood.
scientia non olet · About LEMON Manuals