LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Intake Manifold Tuning Valve Actuator ReplacementRemoval Procedure >> Installation ProcedureIntake Manifold Tuning Valve Vacuum Reservoir Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation ProcedureIntake Manifold Tuning Valve Vacuum Reservoir Replacement

    Fig 1: View Of Fuel Rail
    GM1371864Courtesy of GENERAL MOTORS CORP.
  1. Install the IMT valve actuator valve to the IMT valve.
    2. NOTE: Refer to Fastener Notice .
  2. Install the IMT valve actuator valve bolts.

    Tighten:  Tighten the IMT valve actuator valve retaining bolts to 12 N.m (106 lb ft).

  3. Connect the vacuum hose to the IMT valve actuator valve.
scientia non olet · About LEMON Manuals