LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Sport, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Glass/Windows/Mirrors) >> Repair Instructions >> Windshield Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new weatherstrip to the windshield.
    Fig 1: Installing Weatherstrip To Windshield
    G04718217Courtesy of SUZUKI OF AMERICA CORP.
  2. Apply tape to the new weatherstrip and the windshield to hold the weatherstrip in place.
  3. Apply adhesive primer to the windshield frame and the perimeter of the windshield.
    Fig 2: Applying Adhesive Primer To Windshield Frame And Perimeter Of Windshield
    G04718218Courtesy of SUZUKI OF AMERICA CORP.
  4. Apply glass adhesive to the windshield frame.
  5. Install the windshield into the windshield frame.
  6. Reposition the tape over the weatherstrip, the windshield, and the windshield frame to hold the windshield in place.
  7. Let the adhesive dry for 24 hours.
  8. Remove the tape.
  9. Check for waterleaks by pouring water on the windshield. If a leak is found, dry the windshield and fill the area that leaks with adhesive. If the leak persists, remove the windshield and repeat the entire procedure.
  10. Install the inside rearview mirror. Refer to Inside Rearview Mirror Installation .
  11. Install the cowl vent grille. Refer to COWL VENT GRILLE REMOVAL AND INSTALLATION .
    Fig 3: Applying Glass Adhesive To Windshield Frame
    G04718219Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals