Generalized Testing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Set up the watertest stands.

Fig 1: Identifying Watertest Stand Components
Courtesy of SUZUKI OF AMERICA CORP.
Set up the watertest stand leak test.

Fig 2: Positioning Watertest Stand Leak Test
Courtesy of SUZUKI OF AMERICA CORP.
Perform the watertest stand leak test. Refer to Watertest Stand Specifications .
If the local water pressure does not allow the required water pressure of 155 kPa (22.5 psi), move both stands closer to the vehicle so that the water spray overlaps.

Fig 3: Identifying Water Spray Positions
Courtesy of SUZUKI OF AMERICA CORP.