Tightening Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | lb-ft | lb-in |
|---|---|---|---|
| Dash Seal Retaining Ring Nuts | 7 | - | 62 |
| Hydraulic Cylinder Line Fittings - Cylinder End | 28 | 21 | - |
| Hydraulic Cylinder Line Fittings - Valve End | 18 | 13 | - |
| Lower Intermediate Shaft Pinch Bolts | 25 | 18 | - |
| Outer Tie Rod Adjusting Nut | 64 | 47 | - |
| Outer Tie Rod Nuts | 50 | 37 | - |
| Steering Gear Inlet and Outlet Pipe Fittings | 28 | 21 | - |
| Steering Gear Mounting Bracket Nuts and Bolts | 60 | 44 | - |
| Transaxle Center Bracket-to-Engine Bolt | 80 | 59 | - |
| Pressure Line Fitting | 28 | 21 | - |
| Return Line Clip Bolts | 8 | - | 71 |
| Air Filter Housing Assembly Bolts | 6 | - | 53 |
| High-Pressure Hose Fitting | 28 | 21 | - |
| Power Steering Pump Bolts | 25 | 18 | - |
| Right Side Power Steering Pump Bracket Bolts | 35 | 26 | - |
| Upper Intermediate Shaft Pinch Bolt | 22 | 18 | - |
| Fluid Reservoir Nuts | 10 | - | - |
| Return Line Fitting | 28 | 21 | - |
| Pressure Line Retaining Clip Bolt | 8 | - | 71 |