DTC 06: Steering Wheel Speed Sensor Open: Troubleshooting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING REFERENCE
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Variable Effort Steering Diagnostic System Check? | - | Go to Step 2 | Go to DIAGNOSTIC SYSTEM CHECK-VARIABLE EFFORT STEERING |
| 2 | Check for a poor connection at the SSPS control module and the steering wheel speed sensor. Did you find and correct the condition? |
- | Go to Step 9 | Go to Step 3 |
| 3 |
Is the measured voltage within the specified value? |
4.8 - 5.2 V | Go to Step 4 | Go to Step 8 |
| 4 |
Is the resistance about 0 Ω? |
∞ 0 Ω | Go to Step 5 | Go to Step 7 |
| 5 | Check the resistance between the terminal 2 of steering wheel speed sensor and the terminal 14 of SSPS control module. Is the resistance about 0 Ω? |
∞ 0 Ω | Go to Step 6 | Go to Step 7 |
| 6 | Check the resistance between the terminal 1 of steering wheel speed sensor and the terminal 5 of SSPS control module. Is the resistance about 0 Ω? |
∞ 0 Ω | Go to Step 9 | Go to Step 7 |
| 7 | Repair the wiring. Is the repair completed? |
- | Go to Step 10 | - |
| 8 | Replace the steering wheel speed sensor. Is the repair completed? |
- | Go to Step 10 | - |
| 9 | Replace the SSPS control module. Is the repair complete? |
- | Go to Step 10 | - |
| 10 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |