Headlamp Assembly Removal and Installation (For HATCHBACK Model): Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the radiator grille screws.

Fig 1: Identifying Radiator Grille & Screws
Courtesy of SUZUKI OF AMERICA CORP.
Insert the negative screwdriver to the radiator service hole and then push the radiator grille clips.
Remove the radiator grille.

Fig 2: Inserting Screwdriver To Radiator Service Hole
Courtesy of SUZUKI OF AMERICA CORP.
Remove the headlamp mounting bolts.

Fig 3: Identifying Headlamp Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the turn signal lamp electrical connector.
Disconnect the headlamp electrical connector.
Remove the headlamp assembly.

Fig 4: Identifying Headlamp & Turn Signal Lamp Electrical Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Remove the headlamp cap.

Fig 5: Identifying Headlamp Cap
Courtesy of SUZUKI OF AMERICA CORP.
Pry off the headlamp bulb clip.
Disconnect the headlamp bulb connector.
Remove the headlamp bulb.

Fig 6: Identifying Headlamp Bulb Connector
Courtesy of SUZUKI OF AMERICA CORP.
Remove the park lamp.

Fig 7: Identifying Park Lamp
Courtesy of SUZUKI OF AMERICA CORP.
Remove the turn signal lamp.

Fig 8: Identifying Turn Signal Lamp
Courtesy of SUZUKI OF AMERICA CORP.