Tightening Torque Specifications
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Pressure Transducer | 7 | - | 62 |
| Expansion Valve Stud Bolts | 8 | - | 71 |
| Liquid Pipe Support Clamp Bolts | 4 | - | 35 |
| Liquid Pipe Block-to-Receiver Dryer Retaining Nut | 14 | 10 | - |
| Liquid Pipe Block-to-Expansion Valve Retaining Nut | 14 | 10 | - |
| Refrigerant Discharge Hose Block-to-Condenser Retaining Nut | 16 | 12 | - |
| Refrigerant Discharge Hose Block-to-Compressor Retaining Nut | 33 | 24 | - |
| Evaporator Core Cover Screws | 1.2 | - | 11 |
| Heater Core Housing-to-Evaporator Housing Retaining Screws | 1.2 | - | 11 |
| Suction Hose Block-to-Compressor Retaining Nut | 33 | 24 | - |
| Suction Hose Support Clamp-to-Longitudinal Member Bolt | 8 | - | 71 |
| Suction Hose Support Clamp-to-Engine Bracket Bolt | 14 | 10 | - |
| Suction Hose Block-to-Expansion Valve Retaining Nut | 14 | 10 | - |
| (Receiver Dryer) Band Clamp Bolt | 5 | - | 44 |
| Receiver Dryer-to-Condenser Pipe Block Bolt | 5 | - | 44 |
| Front Compressor-to-Bracket Mounting Bolts | 35 | 26 | - |
| Rear Compressor-to-Bracket Mounting Bolts | 20 | 15 | - |
| Condenser Mount Bolts | 4 | - | 35 |
| (Compressor) Clutch Plate and Hub Assembly Retaining Nut | 17 | 13 | - |
| (Compressor) Through Bolts | 10 | - | 89 |