Dust Boot Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Install the dust boot.
- Install the tie rod end dust boot retaining clamp. Install the cylinder end dust boot retaining clamp with the installer KM-J-22610.
- Install the outer tie rod. Refer to Outer Tie Rod Removal and Installation .
- Install the wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
- Lower the vehicle.