Reduction Driven Gear Assembly Disassembly and Reassembly: Disassembly

1. Remove left bearing (1) and bevel gear (2) using special tool, bearing puller (3) and hydraulic press (4).

   Special Tool 

   (A): 09925-98220 

   Fig 1: Pressing Out Left Bearing And Bevel Gear

   Courtesy of SUZUKI OF AMERICA CORP.
2. In order to remove right bearing (1) from reduction driven gear (2), grind with a grinder (3) one part "a" of bearing as illustrated till it becomes thin.
   CAUTION: Be careful not to grind too far not to damage reduction driven gear.
   Fig 2: Identifying Right Bearing And Reduction Driven Gear

   Courtesy of SUZUKI OF AMERICA CORP.
3. Break with a chisel (1) the thin ground bearing (2), and it can be removed.

Fig 3: Identifying Chisel And Thin Ground Bearing

Courtesy of SUZUKI OF AMERICA CORP.