LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Repair Instructions >> Underdrive Brake Disassembly and Reassembly >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Underdrive Brake Disassembly and Reassembly: Reassembly

WARNING: This page is about a different variant/trim than selected.
  1. Apply A/T fluid to new O-rings.
  2. Install new O-rings (1) to underdrive brake piston cover (2).
    Fig 1: Identifying New O-Rings To Underdrive Brake Piston Cover
    G04847941Courtesy of SUZUKI OF AMERICA CORP.
  3. Install underdrive brake piston rod spring (1), underdrive brake piston rod washer (2) and underdrive brake piston rod (3) to underdrive brake piston (4).
  4. Compress underdrive brake piston rod by hand and then install E-ring (5) using pliers or the like.
  5. Apply A/T fluid to new O-ring.
  6. Install new O-ring (6) to underdrive brake piston.
    Fig 2: Identifying O-Ring To Underdrive Brake Piston
    G04847942Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals