April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed Sensor Inspection

WARNING: This page is about a different variant/trim than selected.

Reference: OUTPUT SHAFT SPEED SENSOR REMOVAL AND INSTALLATION

Disconnect negative cable at battery.
Disconnect output shaft speed sensor connector (2).
Check resistance between output shaft speed sensor (1) terminals. If check result is not as specified, replace sensor.
Output shaft speed sensor resistance

Standard: 344 - 516 Ω at 20°C (68°F)

Fig 1: Checking Resistance Between Output Shaft Speed Sensor Terminals
Courtesy of SUZUKI OF AMERICA CORP.