April 5, 2026: LEMON Manuals is launched! Read the announcement.

"3" Position Switch Inspection

WARNING: This page is about a different variant/trim than selected.

Remove console box by referring to CONSOLE BOX COMPONENTS .
Disconnect "3" position switch connector (1).
Check continuity between "3" position switch terminals.
If check result is not as satisfied, replace.

"3" position switch specification

Shift selector lever to "3" or "2" range: Continuity

Shift other above range: No continuity

Fig 1: Checking Continuity Between "3" Position Switch Terminals
Courtesy of SUZUKI OF AMERICA CORP.