LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Diagnostic Information and Procedures >> DTC P2764: Torque Converter Clutch Pressure Control Solenoid Control Circuit Low >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
  • Road test should be carried out with 2 persons, a driver and a tester, on a level road.
  1. Clear DTC.
  2. Start engine and warm it up to normal operating temperature.
  3. Drive vehicle with 3rd or 4th gear in "D" range and lock-up ON for 10 seconds or longer by referring to AUTOMATIC GEAR SHIFT TABLE . (Reference: less than 20% throttle opening and at vehicle speed of 80 km/h (50 mile/h) or more)
  4. Decrease vehicle speed gradually and stop vehicle.
  5. Check DTC.
scientia non olet · About LEMON Manuals