LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Diagnostic Information and Procedures >> DTC P0707: Transmission Range Sensor Circuit Low >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
  • Road test should be carried out with 2 persons, a driver and tester, on a level road.
  1. Clear DTC.
  2. Start vehicle and increase vehicle speed to about 40 km/h (25 mile/h) in "D" range.
  3. Keep driving the vehicle speed for 30 seconds or more.
  4. Release accelerator pedal, decrease vehicle speed and stop vehicle.
  5. Turn ignition switch OFF.
  6. Repeat step  3 to  5 one time.
  7. Check DTC, pending DTC and freeze frame data.