HVAC (Heating, Ventilation & Air Conditioning System)
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
HVAC SPECIAL TOOLS DESCRIPTION
| Substitute Special Tools | Special Tools Described in This Information | ||
|---|---|---|---|
| - | J-23128-A | Seal Seat Remover and Installer | |
| - | J-3301 | O-ring Installer | |
| - | J-33013-B | Hub and Drive Plate Remover and Installer | |
| - | J-33017 | Pulley Rotor and Bearing Installer | |
| - | J-33019 | Bearing Staking Tool Set | |
| - | J-33020 | Pulley Puller | |
| - | J-33022 | Shaft Nut Socket | |
| - | J-33023-A | Puller Pilot | |
| - | J-33024 | Clutch Coil Installer Adapter | |
| - | J-33025 | Clutch Coil Puller Legs | |
| - | J-33027 | Clutch Hub Holding Tool | |
| - | J-34614 | Shaft Seal Protector | |
| - | J-34992 | Compressor Holding Fixture | |
| - | J-34993 | Cylinder Alignment Rods | |
| - | J-35372 | Support Block | |
| 09952-76011 | J-5403 | ||
| Snap Ring Pliers | Snap Ring Pliers | ||
| 09952-76011 | J-6083 | ||
| Snap Ring Pliers | Snap Ring Pliers | ||
| - | J-8092 | Driver Handle | |
| - | J-8433-1 | Puller Crossbar | |
| - | J-8433-3 | Forcing Screw | |
| - | J-9398-A | Bearing Remover | |
| - | J-9481 | Bearing Installer | |
| - | J-9553-1 | O-ring Remover | |
| - | J-9625-A | Pressure Testing Connector | |