LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Body Structure) >> Repair Instructions >> Rear Bumper Fascia Removal and Installation (For NOTCHBACK Model) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Bumper Fascia Removal and Installation (For NOTCHBACK Model): Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheels. Refer to WHEEL REMOVAL AND INSTALLATION .
  2. Remove the screws and the mud guards.
  3. Remove the screws and the splash shields.
  4. Remove the screws behind the fascia.
    Fig 1: Identifying Mud Guards & Screws
    G04718485Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the luggage compartment rear quarter trim panels. Refer to LUGGAGE COMPARTMENT WHEELHOUSE TRIM PANEL REMOVAL AND INSTALLATION .
  6. Remove the bolts and the nuts in the luggage compartment.
    Fig 2: Identifying Bolts And Nuts In Luggage Compartment
    G04718486Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove the bolts and the screws.
  8. Remove the rear bumper fascia.
    Fig 3: Identifying Rear Bumper Fascia With Bolts And Screws
    G04718487Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals