LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Body Structure) >> Repair Instructions >> Front Bumper Fascia Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Bumper Fascia Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front wheel well splash shields. Refer to FRONT WHEEL WELL SPLASH SHIELD REMOVAL AND INSTALLATION .
  3. Remove the fog lamps and the headlamps. Refer to FRONT FOG LAMPS REMOVAL AND INSTALLATION , HEADLAMP ASSEMBLY REMOVAL AND INSTALLATION (FOR NOTCHBACK AND STATION WAGON MODEL) and HEADLAMP ASSEMBLY REMOVAL AND INSTALLATION (FOR HATCHBACK MODEL) .
  4. Remove the fender-to-fascia bolts and the screws.
    Fig 1: Identifying Fender-To-Fascia Bolts
    G04718475Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the lower fascia clips.
    Fig 2: Identifying Lower Fascia Clips
    G04718476Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the upper fascia clips.
  7. Remove the front bumper fascia.
    Fig 3: Identifying Front Bumper Fascia
    G04718477Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals