Rear Door Trim Panel Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Install the trim panel.
- Connect the power window control switch electrical connector, if equipped.
- Install the power window control switch.
- Install the door trim panel screws.
Tighten:
Tighten the door trim panel screws to 2.5 N.m (22 lb-in).
- Install the inside door handle trim bezel.
- Raise the rear window.