LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Interior Trim) >> Repair Instructions >> Floor Carpet Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Carpet Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the floor carpet.
  2. Install the gearshift housing with the bolts.

    Tighten: 

    Tighten the gearshift housing bolts and nuts to 8 N.m (70 lb-in).

    Fig 1: Identifying Gearshift Housing, Bolts And Nuts
    G04717242Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the floor console. Refer to Floor Console Removal and Installation .
  4. Install the left and the right kick panels.
  5. Install the front seats. Refer to FRONT BUCKET SEAT REMOVAL AND INSTALLATION .
  6. Install the left and the right lower B-pillar trim panels. Refer to Lower B-pillar Trim Panel Removal and Installation .
  7. Install the left and the right front rocker trim panels.
  8. Install the left and the right lower front seat belt anchors to the B-pillar with the bolts.

    Tighten: 

    Tighten the seat belt anchor bolts to 38 N.m (28 lb-ft).

  9. Install the left and the right rear rocker trim panels. Refer to Rear Rocker Trim Panel Removal and Installation .
  10. Install the rear seat cushion. Refer to REAR SEAT CUSHION REMOVAL AND INSTALLATION .
  11. Connect the negative battery cable.
    Fig 2: Identifying Lower Front Seat Belt Anchor & Bolt
    G04718277Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals