Split Rear Seatback Hinge Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the seatback center hinge with the bolts.
Tighten:
Tighten the rear seat hinge bolts to 45 N.m (33 lb-ft).
- Install the rear seatback and the rear seat cushion. Refer to Split Rear Seatback Removal and Installation and Rear Seat Cushion Removal and Installation .