LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Seat System) >> Repair Instructions >> Seat Covers Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Covers Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not uncover the passenger seat cover. Replace the passenger seat cushion as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the occupants classification system to operate improperly.
  1. Remove the seatback and/or cushion. Refer to Front Seatback Removal and Installation , Front Seat Cushion Removal and Installation , Split Rear Seatback Removal and Installation  and/or Rear Seat Cushion Removal and Installation .
  2. Remove the hog rings from the seatback and/or the cushion.
  3. Remove the seat cover from the seatback and/or the cushion.
    Fig 1: Identifying Seat Cover Onto Seatback And/Or Cushion With Hog Rings
    G04718309Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals