Power Window Regulator Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the window regulator with the nuts.
Tighten:
Tighten the window regulator nuts to 8 N.m (71 lb-in).
- Connect the electrical connector.
- Install the door glass. Refer to Front Door Glass Removal and Installation .
- Connect the negative battery cable.