LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Wipers/Washers) >> Repair Instructions >> Windshield Washer Reservoir Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Washer Reservoir Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front left wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
  3. Remove the bolts, the screws and the front wheel well splash shield.
    Fig 1: Identifying Front Wheel Well Splash Shield, Bolts And Screws
    G04718172Courtesy of SUZUKI OF AMERICA CORP.
  4. Disconnect the washer hose from the washer pump.
  5. Disconnect the reservoir pump electrical connector.
  6. Remove the bolts and the reservoir.
    Fig 2: Identifying Reservoir Pump Electrical Connector
    G04718173Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals