Controls Diagnosis
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
CONTROLS DIAGNOSIS PROCEDURES
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 | Verify the customer's complaint. Are the customer's concerns verified? |
- | Go to Step 2 | System OK |
| 2 | Move controls other than the temperature adjustment. Is an excessive effort required to move the controls? |
- | Go to Step 15 | Go to Step 3 |
| 3 | Move the temperature control. Is an excessive effort required to move the controls? |
- | Go to Step 6 | Go to Step 4 |
| 4 | Move the temperature control. Does the temperature door move too easily? |
- | Go to Step 5 | System OK |
| 5 | Remove the cable from the controller. Does the control knob turn freely, without the click stops? |
- | Go to Step 15 | - |
| 6 | Check the cables for improper routing, kinks, wiring interference or other instrument panel interference. Is there a problem? |
- | Go to Step 7 | Go to Step 8 |
| 7 | Repair as needed. Is the repair complete? |
- | System OK | - |
| 8 |
Is there any door binding? |
- | Go to Step 9 | Go to Step 12 |
| 9 | Check a binding door for shaft alignment, a bent shaft, a bent door or a warped case. Is the door seal OK? |
- | Go to Step 10 | Go to Step 11 |
| 10 |
Is the repair complete? |
- | System OK | - |
| 11 | Repair the door seal, as needed. Is the repair complete? |
- | System OK | - |
| 12 | Check for control binding. Does the control bind? |
- | Go to Step 14 | Go to Step 13 |
| 13 |
Is the repair complete? |
- | System OK | - |
| 14 |
Does the control bind? |
- | Go to Step 15 | Go to Step 16 |
| 15 | Replace the control. Is the repair complete? |
- | System OK | - |
| 16 | Replace the cable. Is the repair complete? |
- | System OK | - |