Serpentine Accessory Drive Belt Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
With the wrench in place on the tensioner bolt, loop the serpentine accessory drive belt loosely over the pulleys.

Fig 1: Turning Tensioner Bolt Clockwise
Courtesy of SUZUKI OF AMERICA CORP.
Slip the belt over the tensioner.
Remove the wrench from the tensioner bolt and the belt will tighten itself.

Fig 2: Identifying Serpentine Accessory Drive Belt

Courtesy of SUZUKI OF AMERICA CORP.

Install the air filter housing assembly into the vehicle.
Install the air intake tube and the air filter housing assembly bolts.
Tighten:

Tighten the air filter housing assembly bolts to 6 N.m (53 lb-in).

Fig 3: Identifying Air Filter Housing Assembly Bolts
Courtesy of SUZUKI OF AMERICA CORP.