Outer Tie Rod Removal and Installation: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
- Mark the threads on the inner tie rod to aid in repositioning the adjusting nut.
- Remove the outer tie rod nut and disconnect the outer tie rod from the steering knuckle using the ball joint remover KM-507-B.
- Loosen the outer tie rod adjusting nut and remove the outer tie rod by twisting it off the inner tie rod.