Outer Tie Rod Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Reposition the adjusting nut to the marks on the inner tie rod.
- Install the outer tie rod by twisting it onto the inner tie rod.
- Connect the outer tie rod to the steering knuckle.
- Perform a front toe adjustment. Refer to FRONT TOE ADJUSTMENT .
- Tighten the adjusting nut.
Tighten:
Tighten the outer tie rod adjusting nut to 64 N.m (47 lb-ft).
- Install the outer tie rod nut.
Tighten:
Tighten the outer tie rod nut to 50 N.m (37 lb-ft).
- Install the wheel. Refer to WHEEL REMOVAL AND INSTALLATION .