Hydraulic Cylinder Lines Removal and Installation: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Siphon the power steering fluid from the fluid reservoir.
- Raise and suitably support the vehicle.
- Disconnect the power steering gear hydraulic cylinder pipes from the power steering gear at the valve end. Replace the O-ring seals as needed.
- Disconnect the power steering gear hydraulic cylinder pipes from the power steering gear at the cylinder end.
- Remove the steering gear hydraulic cylinder pipes from the vehicle.