LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Power Assisted Steering System) >> Diagnostic Information and Procedures >> Power Rack and Pinion Steering Gear Bench Testing >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop the engine.
  2. Disconnect the power steering pipes from the power steering gear.
  3. Remove the extensions and reconnect the pressure and return lines.
  4. Install and connect the power steering gear. Refer to Rack and Pinion Assembly Removal and Installation .
  5. Start the engine and stay idle for 10 seconds.
  6. Check the power steering fluid level. Refer to Checking and Adding Fluid .
scientia non olet · About LEMON Manuals