DTC 01: Actuator Circuit Open: Troubleshooting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING REFERENCE
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Variable Effort Steering Diagnostic System Check? | - | Go to Step 2 | Go to DIAGNOSTIC SYSTEM CHECK-VARIABLE EFFORT STEERING |
| 2 | Check for a poor connection at the SSPS control module and SSPS actuator. Did you find and correct the condition? |
- | Go to Step 8 | Go to Step 5 |
| 3 |
Is the resistance within specified value? |
7-17 Ω | Go to Step 4 | Go to Step 6 |
| 4 | Check the resistance between the terminal 1, 2 of SSPS actuator and the terminal 2, 1 of SSPS control module. Is the resistance about 0 O? |
≈ 0 Ω | Go to Step 7 | Go to Step 5 |
| 5 | Replace the SSPS actuator. Is the repair completed? |
- | Go to step 8 | - |
| 6 | Replace the wiring. Is the repair completed? |
- | Go to Step 8 | - |
| 7 | Replace the SSPS control module. Is the repair completed? |
- | Go to Step 8 | - |
| 8 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |