Speedometer Driven Gear Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Suzuki Reno, 2007 Suzuki Forenza, 2006 Suzuki Reno, and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Coat the O-ring with petroleum jelly.
Install the speedometer-driven gear and the speedometer housing.
Install the speedometer housing retaining bolt.
Tighten:

Tighten the speedometer housing retaining bolt to 4 N.m (35 lb-in).

Fig 1: Identifying Speedometer Housing Retaining Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Connect the speedometer speed sensor electrical connector.

Fig 2: Identifying Speedometer Speed Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.