LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Steering Wheel And Column) >> Repair Instructions >> Wiper Switch and Lever Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiper Switch and Lever Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper and the lower steering column cover panel screws.
  3. Remove the upper and the lower steering column cover panels.
    Fig 1: Identifying Upper And Lower Steering Column Cover Panel Screws
    G04717632Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the wiper switch by pushing the tabs on the top and the bottom of the switch housing.
  5. Disconnect the electrical connector from the wiper switch. Disconnect the cruise control connector, if equipped.
    Fig 2: Disconnecting Electrical Connector From Wiper Switch
    G04717637Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals