LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Steering Wheel And Column) >> Repair Instructions >> Steering Wheel Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Wheel Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the SIR module. Refer to DRIVER AIRBAG MODULE REMOVAL AND INSTALLATION .
  3. Remove the steering wheel nut and the retaining clip.
    Fig 1: Identifying Steering Wheel Nut And Retaining Clip
    G04717644Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the steering wheel using the steering wheel puller KM-210-A.
  5. Unclip the contact ring from the steering wheel, if necessary.
    Fig 2: Identifying Steering Wheel Puller
    G04717645Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals