Steering Wheel Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Clip the contact ring on the steering wheel, if necessary.
- Align the match marks on the steering wheel and the steering column shaft. Turn the signal canceling cam on the wheel to the left.
- Install the retaining clip and the steering wheel nut.
Tighten:
Tighten the steering wheel nut to 38 N.m (28 lb-ft).
- Bend the tabs to secure the retaining clip.
- Install the SIR Module. Refer to DRIVER AIRBAG MODULE REMOVAL AND INSTALLATION .
- Connect the negative battery cable.