LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Transmission) >> Repair Instruction >> Valve Body Disassembly and Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Body Disassembly and Assembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan bolts and oil pan.
  2. Remove the oil pan gasket.
    Fig 1: Identifying Oil Pan Bolts
    G04717314Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove valve body fixing bolts and transaxle input speed sensor bolt on the valve body.
  4. Remove the holder for the transaxle input speed sensor.
    Fig 2: Identifying Valve Body Fixing Bolts
    G04717315Courtesy of SUZUKI OF AMERICA CORP.
  5. Tilt the valve body.
  6. Remove the fastening screw for the output speed sensor under the valve body assembly.
  7. Lever the cable out of the retaining clip and pull out the output speed sensor.
  8. Installation should follow the removal procedure in the reverse order.
    Fig 3: Identifying Valve Body Fixing Bolts
    G04717316Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals