LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Transmission) >> Repair Instruction >> Oil Cooler Pipes/Hoses Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Cooler Pipes/Hoses Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil cooler inlet pipe assembly and the bolts.

    Tighten: 

    Tighten the oil cooler inlet pipe bolts to 35 N.m (26 lb-ft).

    Fig 1: Identifying Oil Cooler Inlet Pipe Assembly Bolts
    G04717266Courtesy of SUZUKI OF AMERICA CORP.
  2. Install the oil cooler outlet pipe assembly and the bolts.

    Tighten: 

    Tighten the oil cooler outlet pipe bolts to 35 N.m (26 lb-ft).

  3. Refill the transaxle fluid. Refer to Transaxle Fluid Level Checking Procedure .
  4. Install the engine under cover. Refer to ENGINE UNDER COVERS REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
    Fig 2: Identifying Oil Cooler Inlet Pipe Assembly Bolts
    G04717267Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals