LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Transmission) >> Diagnostic Information and Procedures >> Internal Wiring Harness Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Internal Wiring Harness Check

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
INSPECTION REFERENCE CHART

Step Action Value(s) Yes No
1
  1. Disconnect the transaxle harness.
  2. Measure the resistance between terminals 3 and 13 of the transaxle wiring connector.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 3 Go to Step 2
2
  1. Disconnect the internal transaxle harness from the first solenoid valve.
  2. Measure the resistance of the first solenoid valve.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
3 Measure the resistance between terminals 3 and 13 the second solenoid valve.
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 5 Go to Step 4
4
  1. Disconnect the internal transaxle harness from the second solenoid valve.
  2. Measure the resistance of the second solenoid valve.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
5 Measure the resistance between terminals 5 and 6 the transaxle wiring connector (EDS 3).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 7 Go to Step 6
6
  1. Disconnect the internal transaxle harness from the pressure control valve 3 (EDS 3).
  2. Measure the resistance of the EDS 3.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
7 Measure the resistance between terminals 5 and 7 the transaxle wiring connector (EDS 4).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 9 Go to Step 8
8
  1. Disconnect the internal transaxle harness from the pressure control valve 4 (EDS 4).
  2. Measure the resistance of the EDS 4.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
9 Measure the resistance between terminals 5 and 10 the transaxle wiring connector (EDS 5).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 11 Go to Step 10
10
  1. Disconnect the internal transaxle harness from the pressure control valve 5 (EDS 5).
  2. Measure the resistance of the EDS 5.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
11 Measure the resistance between terminals 5 and 11 the transaxle wiring connector (EDS 6).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 13 Go to Step 12
12
  1. Disconnect the internal transaxle harness from the pressure control valve 6 (EDS 6).
  2. Measure the resistance of the EDS 6.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
13 Measure the resistance between terminals 4 and 9 the transaxle wiring connector (transaxle temperature sensor).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 15 Go to Step 14
14
  1. Disconnect the internal transaxle harness from the transaxle temperature sensor.
  2. Measure the resistance of the transaxle temperature sensor.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
15 Measure the resistance between terminals 15 and 16 the transaxle wiring connector (transaxle input speed sensor).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 17 Go to Step 16
16
  1. Disconnect the internal transaxle harness from the transaxle input speed sensor.
  2. Measure the resistance of the input speed sensor.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
17 Measure the resistance between terminals 1 and 2 the transaxle wiring connector (transaxle output speed sensor).
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 19 Go to Step 18
18
  1. Disconnect the internal transaxle harness from the transaxle output speed sensor.
  2. Measure the resistance of the transaxle output speed sensor.

Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  Go to Step 20 Go to Step 22
19 Measure the resistance between terminals of internal wiring harness.
Is the resistance within the values shown?		 Refer to COMPONENT RESISTANCE CHART  No problem found, exit table Go to Step 21
20 Inspect for resistance:
  • Inspect the transaxle wiring for poor electrical connections at the transaxle.
  • Look for possible bent, backed out, deformed of damaged terminals.

Check for weak terminal tension.		 - Verify repair and Go to Step 12 No problem found, exit table
21 Replace the internal wiring harness.
Is the replacement complete?		 - No problem found, exit table -
22 Replace the component.
Is the replacement complete?		 - No problem found, exit table -
scientia non olet · About LEMON Manuals