ABS 5.3 Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki Reno and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Insert the ABS 5.3 hydraulic unit into its mounting bracket and install the nuts.
Tighten:

Tighten the ABS 5.3 mounting nuts to 15 N.m (11 lb-ft).
Remove the screw plugs and install all of the hydraulic brake pipes.
Tighten:

Tighten the brake pipe nuts to 22 N.m (16 lb-ft).
Connect the 31-pin wiring harness connector J1.
Connect the negative battery cable.
Bleed the hydraulic system. Refer to WHEEL AND TIRES -- VERONA .

Fig 1: Identifying 2006 Hydraulic Unit With Brake Pipes
Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Removing/Installing EBCM Assembly Mounting Bracket Nuts And Screw Plugs
Courtesy of SUZUKI OF AMERICA CORP.