LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Brakes - Rear) >> Repair Instructions >> Brake Pads Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pads Inspection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Remove the rear wheels. Refer to WHEEL REMOVAL AND INSTALLATION .
  3. Visually check the brake shoe linings for minimum thickness and wear.
  4. Measure the thickness.
    NOTE: The minimum discard thickness of the brake shoe lining is 2 mm (0.08 in.).
  5. Install the shoes in axle sets only.
  6. Install the rear wheels. Refer to WHEEL REMOVAL AND INSTALLATION .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals