LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Brakes - Front) >> Repair Instructions >> Rotor Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rotor Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the rotor. Refer to Rotor Inspection .
  2. Install the rotor to the front wheel hub by tightening the detent screw.

    Tighten: 

    Tighten the rotor-to-front wheel hub detent screw to 4 N.m (35 lb-in).

  3. Install the caliper assembly. Refer to Caliper Assembly Removal and Installation .
scientia non olet · About LEMON Manuals