Brake Pads Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the minimum lining thickness. Refer to Brake Pads Inspection .
- Install the brake pads into the caliper.
- Push the piston inward, if needed.
- Pull down the caliper piston housing and secure it to the retaining frame with the lower bolt.
Tighten:
Tighten the retaining frame-to-caliper housing bolts to 27 N.m (20 lb-ft).
- Install the front wheels. Refer to WHEEL REMOVAL AND INSTALLATION .
- Lower the vehicle.