LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine General Information And Diagnosis) >> Diagnostic Information and Procedures >> Idle Learn Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Learn Procedure

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Whenever the battery cables, the engine control module (ECM), or the ECM fuse is disconnected or replaced, the following idle learn procedure must be performed:

  1. Turn the ignition ON for 5 seconds.
  2. Turn the ignition OFF for 5 seconds.
  3. Start the engine in park/neutral.
  4. Allow the engine to run until the engine coolant is above 185°F(85°C).
  5. Turn the A/C ON for 10 seconds, if equipped.
  6. Turn the A/C OFF for 10 seconds, if equipped.
  7. If the vehicle is equipped with an automatic transaxle, apply the parking brake. While pressing the brake pedal, place the transaxle in D (drive).
  8. Turn the A/C ON for 10 seconds, if equipped.
  9. Turn the A/C OFF for 10 seconds, if equipped.
  10. Turn the ignition OFF. The idle learn procedure is complete.
scientia non olet · About LEMON Manuals