Trailing Link Bracket Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Install the trailing link bracket.

Fig 1: Removing/Installing Trailing Link Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Install the trailing link bracket-to-body bolts.
Tighten:

Tighten the trailing link bracket-to-body bolts to 70 N.m (52 lb-ft).
Connect the trailing link to the trailing link bracket by installing the trailing link-to-trailing link bracket nut and bolt.
Tighten:

Tighten the trailing link-to-trailing link bracket nut to 100 N.m (74 lb-ft).
Lower the vehicle.

Fig 2: Identifying Rear Trailing Link
Courtesy of SUZUKI OF AMERICA CORP.