Preliminary Inspection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS CHART
| Checks | Action |
|---|---|
| Check the tires for proper inflation pressures and normal tread wear. | Inflate the tires to the proper tire pressure. Replace the tires as needed. |
| Check the wheel bearings for looseness. | Tighten the axle nut to the proper specification. Replace the strut wheel bearing as needed. |
| Check for loose ball joints and tie rod ends. | Tighten the ball joints and the tie rods. |
| Check the runout of the wheels and the tires. | Measure and correct the tire runout. |
| Check the vehicle trim heights. | Correct the trim heights. Make the correction before adjusting the toe. |
| Check for loose rack and pinion mounting. | Tighten the mounting brackets for the rack and pinion assembly. |
| Check for improperly operating struts. | Replace the strut assembly. |
| Check for loose control arms. | Tighten the control arm attachment bolts. Replace the control arm bushings as needed. |